1. Assemble the starter is carried out in reverse order with the following. |
2. If the rotor 26 removed from the cap 10 mounted on the drive shaft of the rotor assembly then inserted into the rotor with a drive cap put on the rotor shaft guard ring 1 (see. Fig. Removal of the rotor) and install the snap ring groove 2 in the shaft. |
3. braced ring 1 plate on the press table and applying a pressing force to the rotor shaft, Press on ring 1 snap ring 2. |
4. The axial clearance of the rotor shaft should be 0.1-0.3 mm. Adjustable axial clearance shims 6 (see. Fig. Details starter). |
5. After assembly is recommended to cover the sealant "D3" connectors between cover and starter between the traction relay of a starter and a cover, between the bearing cover and the cover of a starter, as well as the head of coupling bolts, head bolts of the traction relay, head bearing cap bolts. |