1. Remove the gearbox (see. Subsection 5.1). |
2. Remove the return spring 20 (see. Fig. Drive clutch (transmission type 084)) with one arm. |
3. Turn the lever shaft 8 (see. Fig. The mechanism of the clutch: a - transmission type 084) situated in the clutch housing 1, so that the release bearing 4 has moved up the guide sleeve 2. |
4. Remove the two retaining spring 6. |
5. Remove the release bearing 4. |
6. Remove the brackets 5 of the release bearing 4. |
7. Loosen the screws 3 and remove the guide bushing 2. |
On models with the transmission type 084 |
8. Press out a large hub 9. |
9. Remove the shaft 8 of the clutch lever. |
10. Press out a small bush 7 (if necessary, replacement). |
On models with the transmission type 085 |
A warning Clutch lever for the transmission of type 085 has a different structure.
|
11. Remove the retaining ring 11 (see. Fig. The mechanism of the clutch: b - transmission of type 085). |
12. Pull the lever shaft 8 from the clutch housing 1 clutch lever at the same time removing the release bearing 12 and a sealing ring 15. |
13. Press out the inner 13 and outer sleeve 14 (if necessary, replacement). |