 printable version
The front indicator lamps
| Fig. 9.14. Removing front bumper with reflector (shown in the car without fog lights)
|
The vehicles that fog lights are absent, bumper inserted only blinkers. To remove the front turn signal must first be removed from the bumper reflector, carefully pry it from the outside using a flathead screwdriver (Fig. 9.14). On the inner side tabs become visible. Click on them, pull the turn signal on and remove it from the bumper. Disconnect from the turn signal wiring connector. To replace the lamp, turn the bulb holder anticlockwise and remove it from the lamp. Since this relates to a chuck chucks the bayonet type, to extract from it the lamp is necessary to press on it and rotate counterclockwise. Installation is in the reverse order of removal. It is necessary to monitor the reliability of fixing lights and reflector holders.
| 
