 printable version
Replacing the hatch
Install in the following order:
| Fig. 15.73. Verifying the installation of the drive mechanism in a position corresponding to the closed hatch: 1 - axis; 2 - lock levers
|
- Set the drive mechanism of the hatch in the position corresponding to the closed hatch, the axes must be within the areas indicated by the arrows (Fig. 15.73);
| Fig. 15.74. Mounting hatch: 1 - the screw; 2 - an adjusting washer; 3 - locating pins
|
- Replace the pins 3 (Fig. 15.74) shims 2 with longitudinal slots; - Slightly tighten the screws; - Set the hatch to the desired height; - Tighten the screws.
| 
