 printable version
Handbrake
Fasteners handbrake lever
1 - handbrake lever,
2 - a nut, 25 Nm
3 - canceller, | 4 - a cable of a manual brake,
5 - decorative trim handbrake lever |
Withdrawal
| PERFORMANCE ORDER | | 1. Remove the trim rear center console. |  | 2. Unscrew the two screws (1) securing the base of the handbrake lever. Blade screwdriver through the hole in the bottom of the handbrake lever, moving down, disconnect the cable from the hand brake lever. | | 3. Remove the handbrake lever. |
|
Setting
| PERFORMANCE ORDER | | 1. Connect the cable of a manual brake with compensator. | | 2. Screw the nuts hand brake lever and tighten them to 25 Nm. | | 3. Check and, if necessary, adjust the brake cables of a manual operation. | | 4. Install the decorative trim rear center console. |
|
|
