Capacities

Planetary gearbox and final drive

Letter designations, identification units, transmission ratios from the Passat 2006 model

Removal and installation of a sealing ring torque converter

Withdrawal

Remove the O-ring with the help of a stripper (Fig. 3.67).

Setting

Fitting the seal ring using a mandrel flush (Fig. 3.68).

Install the torque converter

Carefully mount the hub torque converter through sealing ring to the first stop.

It is easy to rotate the torque converter to the gearbox until the groove in the sleeve enters the clutch disc of the impeller and the torque converter will not move significantly inside.

The torque converter is installed correctly, if it is easily rotated by hand and day-circle sits evenly in the gearbox.