 printable version
Engine Mount
When replacing the engine mounts use Fig. 23-25. It jacking engine to unload individual suspension elements. Always observe the tightening torque mounting bolts the engine mount. When purchasing parts and suspension supports remember that for mechanical and automatic transmission are different. Adjusting the engine mount is required only if you have been removed the engine and gearbox, and engine and its supporting beam was unscrewed rubber mounts. In order to properly set the engine do the following: - Loosen and then tighten again by hand 5-6 revolutions of the engine mount bolts support;
| Fig. 24. The right engine mount exploded. Tightening torques of fastening of support arm: 1 = 55 Nm; 2 = 60 Nm
|
- Engine shake back and forth, so it has leveled off, and tighten the bolts and nuts, following the specified tightening torques (see. Fig. 24 and 25).
| Fig. 25. The right engine mount exploded in a car with automatic transmission. Tightening torques of fastening of support arm: 1 = 55 Nm; 2 = 110 Nm; 3 = 60 Nm
|
| 
