printable version

The system of washing and cleaning glasses

Rubber onto replaced in case they leave streaks on the glass. In the trading network can be purchased as a set with rubber wipers petals and individual rubber petals. When replacing the rubber does not bend the petals janitor.

Withdrawal

PERFORMANCE ORDER

1. Raise the wiper arm and install the janitor flat. 2. Press the spring clip (A) and move the janitor (B) down, removing the hook arm. 3. Move the janitor up and remove the lever. 4. Squeeze the tongs both steel tires on the closed side of the street sweeper and remove the side of the upper jaws. Rubber petal with steel tires removed from the remaining clips janitor.

PERFORMANCE ORDER

1. Set free in one clip janitor new rubber petal without steel tires. 2. Enter the two tires in a rubber tab so that the notches indicated the tire rubber and rubber noses inside the notches. 3. Squeeze the tongs with rubber tires and both steel and insert another clip so that the clip noses on both sides went into the groove (arrow) of the rubber tab. 4. Insert the janitor in the lever and engage the spring clip into a hook arm. 5. Fold the arm in place. Pay attention to the fit of the rubber petal to the glass throughout.