printable version

Body

VW T4 has a self-supporting steel body. The floor, roof, fenders, and side portions are welded together by spot welding. So great damage to the body can Device thread only to the service station. The machine with the platform-body platform with a frame.

Bonnet, boot lid and doors are bolted and easily replaceable. When installing it is necessary to maintain proper clearances. This means that the distance between the parts of the body along the entire length of the gap should be the same, otherwise, for example, a door or rattles may cause increased wind noise during driving.

Security measures at carrying out welding work

When welding or other work with sparking near the battery, be sure to remove it.

For details of the air conditioning system can not be welded or soldered. This also applies to welding and tinning work on the machine and if there is a danger of heating parts of the unit. During repair paintwork object temperature in an oven or in a preheating zone should not exceed + 80 ?� C.