add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks
Hyundai Accent
Home
 
Hyundai
Accent
Instructions
Engine
Greasing system
Cooling
Control, reduced toxicity
Fuel system
Ignition system
Coupling
Transmission
Axes and power shafts
Suspension
Technical data
Lower arm front suspension
Replace the lower arm bushing
Replacement of the plug (G) of the lower arm
Front stabilizer
Rear strut
Replacing the rear trailing arm bushings Rear suspension
Replacing the rear control arm bushing (A and B) of the rear suspension
Rear anti-roll bar
The corners of the front axle
Adjustment of a convergence of back wheels
Tyre wear
Anti-skid chains
Runout
Tightening the wheel nuts
Shift of wheels
Check withdrawal and course instability of the car
Caring for aluminum alloy wheels
Troubleshooting
Diagnosis tire wear
Steering
Brakes
Body
Air
Electrical equipment
Appendix
Wiring
 


Hit Counter by Digits


print page printable version

Caring for aluminum alloy wheels



PERFORMANCE ORDER
1. Aluminum alloy is exposed to the harmful effects of alkali. If the car is exposed to salt from sea water or road chemicals, you must immediately wash the car with clean water, then apply a wax polish discs on all wheels to protect them from corrosion.
2. When using a pair of washing the car, do not point it to the wheels.
3. When tightening the wheel nuts with aluminum rims, follow these guidelines:

a. Clean the surface of the sleeve;
b. tighten the wheel nuts to torque tightening;
c. Do not tighten the wheel nuts by pressing the foot switch;
d. Do not grease the thread wheel nuts.




« previos page
Check withdrawal and course instability of the car
next page »
Troubleshooting

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.