add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Hyundai Elantra
Home
 
Hyundai
Elantra
Gasoline engines 1.6, 1.8 and 2.0 liters
The diesel engine of 2.0 liters
Greasing system
Technical data
Check engine oil level
Replacing the engine oil
Changing the oil filter
Choice of motor oil
Oil pump gasoline engines
The oil pump diesel engines
Oil cooler diesel engines
Cooling
Fuel system
Control systems and emission control
Ignition system
The system of preliminary heating of the diesel engine
Coupling
Manual transmission
Automatic Transmission
Drive shafts, front and rear axles
Suspension
Steering
Brakes
Body
The air conditioning system
Electrical equipment
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Check engine oil level



PERFORMANCE ORDER

  1. Place the vehicle on level ground.
  2. Warm up the engine to normal operating temperature and turn it off.

If the vehicle has not been used for a long time, run the engine for 20 minutes.

  1. Wait 2-3 minutes to drain the oil in a pan.
  1. Remove the dipstick and check the oil level of the oil. If the oil level is near the tag ?�L?� on the dipstick, add oil to the mark ?�F?�.

When refilling, use the same type of engine oil that is poured into the engine.

  1. Make sure the engine oil is not mixed with the coolant or gasoline and has the proper viscosity.




« previos page
Technical data
next page »
Replacing the engine oil

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.