 printable version
Spark plug
A warning  Do not service the spark plug on the hot engine.
Withdrawal
Setting
| PERFORMANCE ORDER | | 1. Put on a carving candles composition prevents tacking or molybdenum-based lubricant. | | 2. Replace the spark plug in the cylinder head. Tightening torque candles: 14,7-22,6 N ??? m | | 3. Connect the high-voltage wire to the spark plug. | | 4. Connect the cable to the negative terminal of the battery. |
|
Check
| PERFORMANCE ORDER | | 1. Remove the spark plug. | | 2. Connect the high-voltage spark plug wire. |  | 3. Hold the spark plug special pliers with insulated handles, keep the spark plug at a distance of 5-10 mm from the "masses." |
A warning Do not touch the body of the car during the following operations.
| | 4. The assistant should crank the engine starter, and the spark between the electrodes should be observed sustained strong spark. |
A warning If there is no spark, replace the spark plug.
|  | 5. In the absence of sparks or if the spark is weak, check the condition and correct the following defects:
- The presence of soot and clean or replace the spark plug;
- When oil contamination clean or replace the spark plug;
- When worn or burnout, replace the spark plug electrodes;
- The destruction of the ceramic insulator, replace the spark plug;
- Ring is damaged, replace the spark plug spark plug;
- In violation of the electrode gap in the spark plug, adjust gap. | The adjustment of the gap is carried podgibaniem side electrode. The central electrode in no case can not be bent, as this may cause damage to the insulator and a candle exit out of operation. For podgibaniem side electrode spark necessary to use a special tool.
Electrode gap spark plugs:
Engine FE DOHC: 1,0-1,1 mm
Engine T8 DOHC: 0,7-0,8 mm |
|
|
