REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Rio (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Rio
		Instructions
		Engines A3E, A5D
		Greasing system
		Cooling
		Fuel system
		Ignition system
		Coupling
		Transmission
		Axes and power shafts
		Suspension
		Wheels and tires
			Technical data
			Recommendations about replacement of tires
			Checking the air pressure and condition of tires
			Runout
			Shift of wheels
			Wheel balancing
		Steering
		Brakes
		Body
		The air conditioning system
		Electrical equipment

If tire replacement by an aluminum wheel disk and using steel tools to avoid damaging the disk between the disk and the tool lay a rubber protective insert.
Work is done on a rubber mat, not on a hard surface.

Installation and repair of tires requires special tools and skills. These works may only be performed by professionals.

printable version

Recommendations about replacement of tires

Note the following recommendations for removing and installing tires on rims.

Be careful not to damage during installation inner side of the rim or the outer edge of the inner side surface of the seat of the tire.

A wire brush or emery paper clear all rust and / or dirt from the inside of the wheel rim.

Clearing of aluminum wheel disks spend with use only a soft cloth.

Remove from the tread of the tire all foreign objects, such as pebbles, broken glass, nails, etc.

Check the installation of the gate.

For tightness check use a soap solution.

« previos page
Technical data

next page »
Checking the air pressure and condition of tires