add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Rio (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks
Kia Rio
Home
 
Kia
Rio
Instructions
Engines A3E, A5D
Greasing system
Cooling
Fuel system
Ignition system
Coupling
Transmission
Axes and power shafts
Suspension
Wheels and tires
Steering
Brakes
Body
The air conditioning system
Electrical equipment
Technical data
Electrical circuits
Generator
Accumulator battery
Starter
Check while cranking the engine is not warmed-up engine
Check the electrical circuit of the traction relay
Check of the traction relay
Check of brushes and brush holder
Checking the stator coils
Check rotor
Removing and installing starter
Repair of starter
Multifunction switch
Sound signal
Fuse and relay, established in car salon
Check the door lock switch activator
Check of the switch of adjustment of position of the door mirror
Check activator position outside rearview mirror
Checking the engine window
Check the rear window defogger
Repair of a current-carrying strip of a heater
Windshield Wiper Motor
Washers
Adjusting headlights
Adjustment of light fog lights
Airbags (SRS)
Warning Labels
Airbag and a spiral wire
Check airbags
Checking the spiral wire (spring)
The front passenger airbag
Electrical circuits
 


Hit Counter by Digits


print page printable version

Electrical equipment



Negative ground electrical system has an operating voltage of 12 volts. Power for the system comes from the electrical lead-acid battery, which is recharged by a generator.

It should be noted that when working with any element of the vehicle's electrical wire of the negative battery terminal must be disconnected to prevent short circuits and / or fire.

At regular intervals check the location and fastening of wires, make sure that the wires do not grind on the other elements. If you find that any wires rub against the other elements, take the wire to the side and secure so that it does not happen again.

Safety measures

It is forbidden to change the polarity of the supply of various equipment and devices of electrical equipment in order to avoid failure of the semiconductor devices.

Do not disconnect and connect the battery, measuring instruments and any wires with the engine running.

It does not test the serviceability of the generator circuit on the weight of the power output.





« previos page
The control panel air-conditioning system
next page »
Technical data

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.