| 1. Set the selector lever on the baseplate. |
2. Set the guide plate on the base plate and fix two bolts. Torque: 6,8-9,8 N ??? m |
3. Lubricate 0-GL02 on the inside of the roller. |
4. Move the selector lever to position P. |
5. Freely set the spring plate, spring plate and top plate. Tightening torque: 2.0-2.9 N ??? m |
6. Lubricate 0-GL02 on the outer and inner part of the guide plate. |
7. Further assembly is carried out in sequence, return dismantling. |
8. Make sure that the selector lever position indication correspond to the selector lever. |