 printable version
Checking camshaft
Set neck ?��1 and ?��5 camshaft on prisms.
If the heartbeat is not correct, replace the camshaft. Maximum runout: 0.03 mm.
| Fig. 2.153. Measuring the height of contour of cam
|
Measure the height of the cam contour at two points, as shown in Figure 2.153. If the height is not correct, replace the camshaft. Sheika ?��1. The standard height of a cam-L8: Inlet - 40.79 mm; Release - 41,08 mm. Camshaft LF, L3: Inlet - 42.12 mm; Release - 41,08 mm. With variable valve timing mechanism: Inlet - 42.44 mm; Release - 41,18 mm. Sheika ?��5 The standard height of a cam-L8: Inlet - 40.692 mm; Issue - 40.982 mm. Camshaft LF, L3: Inlet - 42.022 mm; Issue - 40.982 mm. With variable valve timing mechanism: Inlet - 42.342 mm; Issue - 41.082 mm.
| 
