REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 6 (2002 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	6
		Operation and maintenance of car
		Engine
			General description new engines models L8, LF, L3
			The mechanical part of engines
				Engine Model L8 or LF
				Checking the contents of the CO / CH in the exhaust gas
				Measurement of engine compression
				Verify accessory drive belt
				General information and safety when removing the power unit
				Removal of sealant
				Removal and installation of the power unit
					Removing support ?��1
					Removing the motor mount and engine mount ?��4 ?��4
					Installing the engine mounting bracket ?��3
					Installing the motor mount and engine mount ?��4 ?��4
					Installation support ?��1
				Check actuator variable valve timing (L3)
				Removal and installation of the actuator variable valve timing (L3)
				Timing chain drive
				Removal and installation of the oil control valve (OCV) (L3)
				Checking the oil control valve (OCV) (L3)
				By operation of the spool valve (OCV) (L3)
				General repair operations on the power unit
				Check the cylinder head
				Assembling the cylinder (the beginning)
				Assembling the cylinder (the end)
				Assembling the cylinder head
				Assembling the valve timing
			Appendix 1
			Annex 2
			Appendix 3
		Transmission
		Chassis
		Steering Gear
		Brakes
		Onboard electric
		Body

Installing the motor mount and engine mount ?��4 ?��4

Fig. 2.97. Order of a tightening bolt and nut bracket engine mounts and engine mounts ?��4 ?��4

Tighten the bolt and nut on the motor mount and engine mount ?��4 ?��4 in the order shown in Figure 2.97.

Fig. 2.92. Motor jack

Secure the engine and the gearbox in unit with the main gear, the engine using a jack and an additional device (see. Fig. 2.92)

Fig. 2.91. Bolts engine support ?��1

Remove the lift and secure the engine and the gearbox in unit with the main gear, using a special device (see. Fig. 2.91).