Cable choke

Disconnect the negative battery terminal.

Remove the air filter.

Disconnect the control cable from the carburetor choke, which release the screw securing the clamp, remove the clamp of the cable cover and disconnect the cable.

Unscrew the ring nut shell cable to the instrument panel, accessible from the passenger compartment. Rotate 180 ?� the control lever and remove the grub screw fixing the handle.

Remove the control knob from the instrument panel. Remove the screw fastening the light indicator opening the choke and remove the light from the sheath.

Remove the cable from the rubber cover in the wall of the engine compartment and pull out.

Installation is spent to sequences, return to removal, taking into account the following.

Adjust the position of the sheath in the clamp so that when retracted to the stop position of the control handle felt very small free lift cable.

Ask the assistant inserted completely and fully pull rope handle - choke valve should be fully opened and closed.

Install an air filter, and connect the wire to the negative terminal of the battery. Check for proper operation of the light indicator.