printable version
Brake disk
Inspection PERFORMANCE ORDER | 1. Remove the brake caliper. | | 2. Inspect the disc surface for scratches or damage. If the depth of scratches greater than 0.3 mm, the disc must be restored. | | 3. Check the disc runout using a dial gauge. | | 4. If the disc in the order, treat the disc with sandpaper. | | 5. Check the disc thickness and difference in thickness between different portions of the disk. Replace the brake disc if necessary. |
|
A warning
| Minimum thickness of the brake disc is usually indicated on the disc. |
Withdrawal PERFORMANCE ORDER | | 1. Before removing the brake disc front wheels turn off fixing bolts (arrows). | | 2. Remove the caliper mounting bracket. | | 3. If the fixing bolts of the brake disc is not unscrewed, use the special screwdriver. | | 4. If the brake disc is not removed, tighten the two screws in the specially provided holes and tighten them to remove the brake disc. |
|
Setting Installation is spent upside-down removals.
|