REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 626 (from 1991 to 1998, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	626
		Instructions
		Maintenance
		Engines
		Heating and ventilation
		Fuel system
		An exhaust system
		Transmissions
		Coupling and semiaxes
		The brake system
			Introduction
			Specifications
			Anti-lock braking system (ABS)
			Brake pads disc brakes
			Caliper
			Brake disk
			Brake pads drum brakes
			The wheel cylinder
			The main brake cylinder
			Brake tubes and hoses
			Bleeding brake system
			Servo
			Height and a free wheeling of a pedal brake
			Hand brake
			Cables handbrake
			The switch of an alarm bulb of low brake fluid level
		Chassis
		Body
		Electrical
		Wiring
		Tips and Tricks

Cables handbrake

Replacement

PERFORMANCE ORDER

	1. On models with rear drum brakes, remove the brake pads. Squeeze the tabs on the mounting braided rope and pull the wire through the brake plate. On models with rear disc brakes, disconnect the wire from the brake caliper.
	2. Disconnect the cable from the front end of the rocker, squeeze the tabs and pull mounting wire through the hole in the mounting bracket.
	3. Turn off fixing bolts and remove the cable braid rope.
4. Installation is spent upside-down removals.

« previos page
Hand brake