REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 626 (from 1991 to 1998, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	626
		Instructions
		Maintenance
		Engines
		Heating and ventilation
		Fuel system
		An exhaust system
		Transmissions
		Coupling and semiaxes
		The brake system
			Introduction
			Specifications
			Anti-lock braking system (ABS)
			Brake pads disc brakes
			Caliper
			Brake disk
			Brake pads drum brakes
			The wheel cylinder
			The main brake cylinder
			Brake tubes and hoses
			Bleeding brake system
			Servo
			Height and a free wheeling of a pedal brake
			Hand brake
			Cables handbrake
			The switch of an alarm bulb of low brake fluid level
		Chassis
		Body
		Electrical
		Wiring
		Tips and Tricks

The main brake cylinder

Withdrawal

PERFORMANCE ORDER

1. Disconnect the cable drive cruise control system, if necessary.
2. On models with a manual transmission, disconnect the hose hydraulic drive clutch of the brake fluid reservoir.
3. Drain the brake fluid reservoir.
	4. Turn off fixing nuts and disconnect brake tubes from the cylinder.
	5. Disconnect the fuel level sensor connection from the tank, turn off fixing nuts and remove the cylinder from the vacuum amplifier.

Setting

Installation is spent upside-down removals.

Before installing the cylinder, remove it from the air.