REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 626 (from 1991 to 1998, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	626
		Instructions
		Maintenance
		Engines
		Heating and ventilation
		Fuel system
		An exhaust system
		Transmissions
		Coupling and semiaxes
		The brake system
		Chassis
		Body
		Electrical
			Introduction
			Finding a source of malfunction in the electrical system
			Circuit breakers
			Circuit Breakers
			Relay
			Interrupter of direction indicators / alarms
			Switches on the steering column
			The ignition switch and lock the drum
			The switches on the instrument panel
			Tools dashboard
			Dashboard
			The radio and speakers
			Antenna
			Bulbs headlamps
			Headlights
			Drive headlamps
			Replacing bulbs
			Wiper Engine
			Horn sound
			System of day inclusion of headlights
			Rear Defrost
			The cruise control system
			Power windows
			Central locking and remote control central locking
			Rear-view mirror with the electric drive
			The top hatch
			Air bag
		Wiring
		Tips and Tricks

Replacing bulbs

The front direction indicators / sidelights

PERFORMANCE ORDER

1. On models Ford Probe remove the screws and fold the edge of the wheel arch insert for access to the bulb.
	2. On models Ford Probe, turn counterclockwise and remove the bulb holder with turn signal (A) and a front position lamp (B).
	3. Mazda models, unscrew the cap screw (arrow) and remove the turn signal. Turn a cartridge with a bulb and remove it from the headlight.
4. Replace the bulb.
5. Installation is spent upside-down removals.

The rear direction indicators, lights stoplight and parking lights

PERFORMANCE ORDER

1. Open the trunk lid / tailgate.

2. On models Probe remove the upper mounting screw (left) and remove the lens unit (pictured right).
	3. Mazda models bend the trim panel and remove the mounting screws of the bulbs.
4. Turn the cartridge with a bulb counter-clockwise and remove the cartridge. Replace the bulb.
5. Installation is spent upside-down removals.

Upper stop light

PERFORMANCE ORDER

1. Open the rear door / trunk lid.
	2. On models Probe remove the side panel finishes, then remove the plastic pin (arrow) and remove the front panel.
	3. Remove the cartridge with a bulb (indicated by arrows)
	4. Mazda models press the plastic tab (arrow) and remove the lamp housing.
5. Remove the cartridge and replace the bulb.
6. Installation is spent upside-down removals.

License plate light bulbs

PERFORMANCE ORDER

	1. Remove the two license plate light.
2. Replace the bulb.

Bulbs interior lighting

PERFORMANCE ORDER

	1. Remove the lens to access light (indicated by arrows).
	2. Remove the lens to access the bulb (arrow).
	3. Remove the retaining screw (arrow) and remove the lens.
	4. Remove the lens.
5. Replace the bulb.

Bulbs Lighting dashboard

PERFORMANCE ORDER

1. Remove the instrument panel.
	2. Turn a cartridge with a bulb counter-clockwise and remove it from the dashboard.
3. Replace the bulb.
4. Installation is spent upside-down removals.

« previos page
Drive headlamps

next page »
Wiper Engine