add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 626 (from 1991 to 1998, the year of issue)
general info. full specifications. diagnostics. hints. tips. tricks
 Mazda 626
Home
 
Mazda
626
Instructions
Maintenance
Engines
Heating and ventilation
Fuel system
An exhaust system
Transmissions
Coupling and semiaxes
The brake system
Chassis
Body
Electrical
Introduction
Finding a source of malfunction in the electrical system
Circuit breakers
Circuit Breakers
Relay
Interrupter of direction indicators / alarms
Switches on the steering column
The ignition switch and lock the drum
The switches on the instrument panel
Tools dashboard
Dashboard
The radio and speakers
Antenna
Bulbs headlamps
Headlights
Drive headlamps
Replacing bulbs
Wiper Engine
Horn sound
System of day inclusion of headlights
Rear Defrost
The cruise control system
Power windows
Central locking and remote control central locking
Rear-view mirror with the electric drive
The top hatch
Air bag
Wiring
Tips and Tricks
 


Hit Counter by Digits


print page printable version

Switches on the steering column



Identification of terminal switches - models until 1997 issue

Table conductivity switch on the steering column - model until 1997 issue

Combined switch
Position switch
Conductivity between plugs
Headlights
3 and 8
Sidelights
2 and 3
Dipped headlights
15 and 19
Main beam headlights
19 and 17
Flashing lights
17 and 18
Left direction indicators
9 and 16
Right turn signal
9 and 20
Alarm
6 and 14
Wiper / washer switch:
- turned off
4 and 13
- low speed
11 and 13
- high speed
11 and 12
- Wiper with pauses
11 and 12
- Washers
5 and 11

Identification of terminals combined switch - models 1998 of release


Identification of terminals wiper / washer switch - models 1998 of release

Table conductivity combined switch - models 1998 of release

Position switch
Conductivity between plugs
Headlights
9,10 and 11
Sidelights
10 and 11
Dipped headlights
2 and 6; 7 and 8
Main beam headlights
2 and 5; 3 and 7
Flashing lights
9 and 11
Left direction indicators
12 and 14
Right turn signal
12 and 13
Alarm
6 and 14

Table conductivity wiper / washer switch - models 1998 of release

Position switch
Conductivity between plugs
Turned off
3 and 5
Low speed
3 and 6
High speed
4 and 6
Wiper with pauses
4 and 6
Washers
1 and 6

Check

PERFORMANCE ORDER
1. Remove the bottom casing of a steering column and disconnect the 6-pin and 14-pin connections.
2. Check for continuity between the switch terminals, guided by the following table Fig. Table of conductivity switches on the steering column - model until 1997 release, Table conductivity combined switch - release model 1998, Table conductivity wiper / washer switch - model 1998 Release.

Replacement

PERFORMANCE ORDER
Models up to 1997 release
1. Disconnect the negative battery terminal.
2. Remove the steering wheel and column cover.
3. Remove the coil spring.
4. Turn off fixing screws (are specified by arrows), disconnect the connection terminals and remove the switch.
5. Installation is spent upside-down removals.
Models 1998 of release
6. Remove the column cover.
7. Disconnect a connection socket, turn off fixing screws and remove the switch.
8. Installation is spent upside-down removals.




« previos page
Interrupter of direction indicators / alarms		 next page »
The ignition switch and lock the drum

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.