 printable version
Adjusting tailgate
The purpose of the adjustment is a uniform gap between the tailgate and the parts of the body to the right and the left. From the lower edge of the closure must provide a clear lid. The upper surface of lid should be flush with the body parts on both sides of it.
Transverse and longitudinal adjustment 1. Loosen torque hinge bolts and set the boot lid in the desired position. Adjustment efforts at closing
| Fig. 11.14. Two bolts that loosen the clamp to move the castle
|
2. Loosen the tightening torque of the two bolts securing the bracket lock that it can be moved in a straight line (Fig. 11.14).
| Fig. 11.15. Adjustable clamps
|
3. Close and adjust the trunk lid. It should not be shut down too easily, otherwise it will not provide the necessary seal. At the T-model adjustable clamps (Fig. 11.15) hold the back door in the closed position and prevent movement of the door and knock in the opening while driving. 4. Screw the mounting bracket bolts of the lock.
PRACTICAL ADVICE The dampness in the trunk If the trunk gets dust and moisture, although the cover is adjusted along the perimeter in the opening, check the condition of the seal - in time he may lose elasticity and break off if, for example, in the winter the frozen trunk lid is opened with force. To prevent wear rubber seal regularly rub glycerin or a special tool for care. A failed seal replace |
.
| 
