printable version
Check power steering fluid level
Tube-steering reservoir has a dipstick with scale. Check fluid level in a tank of the hydraulic booster should be performed as often as the check engine oil level.
1. Open the tank cap and pull it together with the probe.
| Fig. 7.15. When working fluid temperature of about + 20 ?� C, the level should be between the two marks on the dipstick
|
2. The power steering fluid level (at an air temperature of about +20 ?� C) must be between the ?�MIN?� and ?�MAX?� mark on the dipstick (Fig. 7.15). 3. If necessary, add hydraulic fluid to the steering mechanism (Mercedes-Benz 000 969 88 03). Use only new fluid, because even minimal contamination may cause a malfunction of hydraulic drive. 4. Replace the plug with the probe and wrap it. 5. In conclusion, bleed the power steering system, turning a few times a steering wheel from lock to lock with the engine running.
|