add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz G-Class (W463, 1999 issue)
general info. full specifications. diagnostics. hints. tips. tricks
 Mercedes-Benz G-class
Home
 
Mercedes-Benz
G-class
Introduction
Controls and operation receptions
Current care and maintenance
Engine
System of cooling, heating, ventilation and air conditioning
The power supply system and exhaust
Systems of an electric motor
Automatic Transmission
Transmission Line
Brakes and auxiliary systems
Suspension and steering
Specifications
Front suspension
Overview
Removal and installation of the front axle assembly
Removal, check and installation of the front shock absorbers
Removal and installation of the front suspension springs
Removing and installing front stabilizer bar
Removing and installing trailing arm suspension
Replacing the rubber bushings of the trailing arm
Rear suspension
Steering
The suspension geometry
Body
Onboard electric
Wiring
 


Hit Counter by Digits


print page printable version

Removal and installation of the front suspension springs



Replacement suspension springs must be done in pairs for each axis!

PERFORMANCE ORDER

  1. Detach propeller shaft from the coupling flange the drive pinion and tie it to the frame.
  1. Expand the front wheels fully to the left and remove the frame from the diagonal bar.
  1. Disconnect the vent line.

  1. Disconnect the brake line and wiring hydraulic wear indicator

  1. Cock a lay brake, Front Axle Poddomkratte, then start the backup for the trailing arm bracket.

  1. Release of the lower leg telescopic shock absorber (see. Section Removal, check and installation of the front shock absorbers).

  1. Lower the front axle and remove the coil springs.

The need for full squeezing the ball Tie Rod absent.

  1. If necessary, remove the rubber buffer inserts.

  1. Installation is in the reverse order - make sure that the ends of the rod springs hit the persistent deepening in the lower trays.

Replacement springs should have the same color coding as the original.





« previos page
Removal, check and installation of the front shock absorbers		 next page »
Removing and installing front stabilizer bar

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.