REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz G-Class (W463, 1999 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	G-class
		Introduction
		Controls and operation receptions
		Current care and maintenance
		Engine
		System of cooling, heating, ventilation and air conditioning
		The power supply system and exhaust
		Systems of an electric motor
		Automatic Transmission
		Transmission Line
		Brakes and auxiliary systems
		Suspension and steering
		Body
		Onboard electric
			general information
			Mounting blocks and control modules
			Switches
			Drive motors, sensors
			Signal & Lighting
				Removal and installation of block headlights, lamp replacement, adjustment of the direction of the optical axes
				Removing and installing rear combination lamps
				Removal and installation of turn indicators
				Removal and installation of a stoplight top level
				Removing and installing fog lights
				Replacement of lamps of internal lighting
			System of additional safety (SRS)
			Audio, navigation and mobile phone
		Wiring

printable version

Removal and installation of turn indicators

Established Indices

On models complete AMG lens direction indicators are closed outside the protective grille

Lens (1) Indicator models standard

Design Indicator

2, 3 - wiring connector
4 - Lampholder
5 - Reference Platform

PERFORMANCE ORDER
Remove the corresponding lens unit (see. Section Removal and installation of block headlights, lamp replacement, adjustment of the direction of the optical axis).
On models 463,246, remove the protective grille (A) Indicator lenses.
Having hooked, remove the mounting platform (5) Lens (1).
Label, disunite and insulate the connectors (2 and 3) wiring.
Hold the nut mounting screws through the window for planting lens unit, release fasteners, and remove the support platform (5) Indicator assembly from the lamp holders (4).
Installation is in the reverse order.

Built in the assembly door mirrors repeaters

Details of the installation built in the assembly of the door mirror repeater lamps (1 of 3)


1 - mirror lens 2 - Connector wiring mirror heating	8 - Repeater Indicator

Details of the installation built in the assembly of the door mirrors indicator lights (2 of 3)


10 - Flat connector	11 - Plug connector

Details of the installation built in the assembly of the door mirrors indicator lights (3 of 3)


3, 7 - Screws 4 - Regulator 5 - Plug connector	6 - Suspension lamp lighting board 9 - Lantern lighting board

PERFORMANCE ORDER

Depress to lock the lens mirror (1), then gently release it from the clamps.
On models without the automatic dimming reflection disunite a socket (2) electrical heating mirrors.
On models with an automatic brightness adjustment reflecting disunite the flat end (10) and plug (11).
Remove the mounting bolts (3) and remove the regulator assembly (4).
Remove equipped with a bayonet mount (6) indicator lights.
Remove the screws (7) and remove the lantern repeater (8).
If necessary, release the clips and remove from the housing side mirror lamp backlight (9).
Installation is in the reverse order.

« previos page
Removing and installing rear combination lamps

next page »
Removal and installation of a stoplight top level