add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Micra (2002 model year)
general info. full specifications. diagnostics. hints. tips. tricks
 Nissan Micra
Home
 
Nissan
Micra
Introduction
Controls and operation receptions
Options and car routine maintenance
Engine
The engine cooling system, heating, ventilation and air conditioning
The power supply system and exhaust
Systems of an electric motor
Manual box of a gear change and clutch
Automatic Transmission
Drive shafts, steering knuckles and Hub assembly
Brakes
Suspension and steering
General recommendations and safety measures
Front suspension
Removing and installing, disassembling and assembling the strut
Removal and installation of control arm
Removing and installing stabilizer bar
Removing and installing subframe
Rear suspension
Steering
Body
Onboard electric
Diagrams
 


Hit Counter by Digits


print page printable version

Removing and installing subframe



Components installation subframe shown in the illustration front suspension.


PERFORMANCE ORDER

  1. Remove the stabilizer and remove the wishbone from the knuckle.
  1. Give fixture of the steering mechanism and separate it from the stretcher.
  1. Remove the idler arm (back support) engine (see. Section Removal and installation of the power unit) and support pipe exhaust system.
  1. Remove the bolt from the upper link of the body.
  2. Poddomkratte subframe and remove bolts of its fastening. Remove subframe together with the upper rod, the transverse arm and stabilizer.
  3. Remove the upper link, wishbone and stabilizer from the stretcher.
  4. Installation is in the reverse order. Finally, check the wheel alignment.




« previos page
Removing and installing stabilizer bar		 next page »
Rear suspension

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.