add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Sunny (from 1991 to 1997, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Nissan Sunny
Home
 
Nissan
Sunny
Instructions
Maintenance
Technical data
Maintenance every 15,000 km or 6 months
Maintenance every 30,000 km or 12 months
Maintenance every 60,000 km or 2 years
Maintenance every 60,000 km or 12 months
Engines
Cooling
Heating and ventilation system
Fuel and exhaust system
The system of the engine is started
Coupling
Transmissions
Axles
Brakes
Suspension and steering
Body
Electrical
 


Hit Counter by Digits


print page printable version

Technical data



Recommended lubricants and fluids - see. Subsection 1.12.7.

Capacities (L)
Engine oil
3.2
Cooling system:
- Vehicles with manual transmission
5.5
- Vehicles with automatic transmission
5.9

Transmission
Manual transmission, 1.4 liter engine
2.8
Manual transmission, 1.6 liter engine
2.9
All a / m with an automatic transmission
7.0
The volume of fluid in the power steering
10
Fuel tank
50
Oil filter
The freezing point of the liquid in the cooling system:
- 28% - antifreeze
-15 ?� C
- 50% - antifreeze
-30 ?� C

Fuel system
The filter element air filter
Carbureted engines
Champion W247 type
Engines with fuel injection:
- The engine of 1,4 l
Type Champion (molded)
- The engine of 1.6 liters
Type Champion U548
Fuel filter:
- Carburettor engines
Champion L110 Type
- Engines with fuel injection
Champion L215 Type
Idle speed:
- Carbureted engines with manual transmission
750 (?� 50) / min
- Fuel-injected engines with manual gearbox
700 (?� 50) / min
- Carbureted engines with automatic transmission
850 (?� 50) / min
- Carbureted engines with automatic transmission
800 (?� 50) / min
CO content:
- Without converter

1,5 (?� 0,5)%

- With neutralizer

not more than 0.5% (not adjusted)

Ignition system
Ignition timing (idle)
Carbureted engines
GA14DS (when disconnecting the hose of a vacuum regulator and recycling)
0 ?� 2 BTDC
GA14DS (hoses, vacuum regulator and recycling are attached)
10 ?� 5 BTDC
GA16DS (when disconnecting the hose of a vacuum regulator and recycling)
2 ?� 2 BTDC
GA16DS (hoses, vacuum regulator and recycling are attached)
10 ?� 5 BTDC
Engines with fuel injected
10 ?� 2 BTDC
Type of spark plugs:
- Carbureted engines GA16DS
Type Champion RS7YCC4 or RS7YC4
- Other engines
Type Champion RS9YCC4 or RS9YC4
The gap between electrodes
1.1 mm

Brakes
Maximum thickness of the linings of disc brakes
2.0 mm
Maximum thickness of drum brake linings
1.5 mm
The deflection of the ancillary drive belt (mm):
- Alternator and power steering pump
7 - 9, the limit - 11
- Generator without power steering pump
7 - 9, the limit - 10
- The air conditioning compressor
6 - 8, marginal - 9.5
- Power-steering pump

4 - 6, the limit - 7.5


A warning

Belt deflection is measured with a force of 10 kgf (see. Text) for a new belt, the value should be reduced by 1 mm.


Torque (Nm)

Sump
34
Spark plug
25
Nut belt tensioner roller conditioner
28
Drain plug cylinder
40
Wheel nuts
108
Bolts of fastening seat belts
50
Plugs Transmission:
- Control aperture
29
- Drain
29
- Automatic transmission drain plug
34




« previos page
Maintenance
next page »
Maintenance every 15,000 km or 6 months

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.