 | 1. Remove the nut (or nut) and bolt the air filter cover (indicated by arrows). |
 | 2. Pull apart the clips of the air filter cover. |
 | 3. Cnimite the air filter cover (pictured - a cover of the air filter injection engine). To remove the cover of the filter may need to be disconnected from the housing cover of the duct. |
 | |
| 4. Remove the filter element, drawing attention to its original orientation in the filter housing (photo on the left - the removal of the filter element to gasoline engines, the photo on the right - on the injector). |
| 5. Wipe the inner surface of the filter housing with a clean cloth to remove all traces of dirt. |
| 6. Insert a new filter element, after it properly orient and tracked correctly installed in the filter housing. |
 | 7. Install the air filter cover and secure with spring latches. Tighten the nut and bolt. |
