printable version
Adjustment of corners of installation of forward wheels
Wheel alignment is necessary to ensure the normal operation of the front suspension. Misalignment of drivability worsens reduces its running stability leads to increased tire wear. The angles of the wheels PARAMETER | GOLF, JETTA | GOLF GT, GTI JETTA GT, GTI | GOLF M103, JETTA M103 | Toe rim 13 '(both wheels on the total) | 0 ?� ?� 0 ?� 10 ' | 0 ?� ?� 0 ?� 10 ' | 0 ?� ?� 0 ?� 10 ' | 10 'correspond to the value of convergence | 1.0 mm | 1.0 mm | 1.0 mm | The camber angle | -0 ?� 30 '?� 0 ?� 20' | -0 ?� 35 '?� 0 ?� 20' | -0 ?� 25 '?� 0 ?� 20' | The difference between the camber angles of the left and right wheels, not more than | 0 ?� 30 ' | 0 ?� 30 ' | 0 ?� 30 ' | The divergence angle of the front wheels when turning 20 ?� left or right | 1 ?� 20 '?� 30' | 1 ?� 20 '?� 30' | 1 ?� 20 '?� 30' | The angle of inclination of the longitudinal axis of rotation of the wheel | 1 ?� 30 '?� 30' | 1 ?� 33 '?� 30' | 1 ?� 25 '?� 30' | The difference between the angles of inclination of the longitudinal axis on the left and right side, no more than | 1 | 1 | 1 |
Wheel alignment should be performed on the bench. Wheel alignment adjustment is carried out with the help of the right adjustable rod 13 (see. Fig. The steering mechanism). To adjust you need to release the lock nut 1 and turning the adjusting rod 13 toe, tighten the locknut 1. Camber angle can be adjusted by setting the special bolts 18 (see. Fig. The front suspension). At the same time the first to be replaced top bolt, and then check the camber. Replace screws you can change the camber on the 1 ?�. The angle of inclination of the longitudinal axis of rotation of the wheel is not adjustable. Before testing and wheel alignment should be brought back to normal pressure in the tires, steering should be adjusted, gaps in the steering rods and suspension should be within acceptable limits. The vehicle must be completely filled and equipped with a spare wheel.
|