| 1. Install the steering column switch 8 to the neutral position. |
| 2. Set the steering wheel 1 to the steering column 13 so that the spokes are in a horizontal position. |
| 3. Install the washer and tighten the nut 6 5 40 N ?ยท m. |
| 4. Connect the electrical wires. |
| 5. Install the trim 3. |
| 6. Connect a wire to "the minus" plug of the storage battery. |
| 7. Make a test drive and check the position of the steering wheel 1, the spokes of which the motion in a straight line must be in a horizontal position. Otherwise rearrange the steering wheel. |
| 8. Check operation of the audio signal. |
| 9. Check operation stalk. |