 printable version
Air filter
Removal and installation of the fuel filter in the following order:
| Fig. 5.79. Air filter diesel engines without turbocharger: 1 - the case; 2 - the filter element; 3 -kryshka; 4 - duct; 5 - the inlet manifold; 6 - a lining; 7 - pressure reducing valve; 8; 13 - duct; 9 - the pipeline supplying oil to the turbocharger; 10 - a pressure sensor; 11 - the turbocharger; 12 - the pipeline of return of oil from the turbocharger; 14 - the heat exchanger; 15 - duct; 16 - a rubber ring; 17 - air intake
|
Loosen the clamp and remove the air duct 4 from the air filter unit 3 (Fig. 5.79.) (engine AAZ) or flow meter of air (other engines); Remove the rubber ring 16 securing the air filter; move the body 1 of the air filter to the engine and disconnect from hego intake pipe 17; Remove the air filter housing from the engine compartment; on engines 1Z, AHL and AFN: Remove the screws and separate the flow meter of air from the air filter housing; remove the brackets, lift the air filter cover and remove the filter element 2; installation of the air filter housing is made in sequence, return to removal. Align the tab on the air filter housing with a recess in the wing of the car.
| 
