 printable version
The accelerator cable (engine AAZ)
A WARNING When working with cable, please note that the cable is very fragile and can not bend. The cable is subjected to kinking, should be replaced. |
Removal and installation of the accelerator cable in the following order: Remove the lower instrument panel trim under the steering column; slightly depress the accelerator pedal and disconnect the accelerator cable from the accelerator pedal; on bulkhead unscrew the mounting of the sealing ring accelerator cable; in the engine compartment, remove the bracket and unplug the cable of an accelerator from the lever of the injection pump; Slide the sealing rubber ring and remove the cover of a cable of an accelerator from an arm; Release the accelerator cable from the bracket and pull it into the engine compartment; installation of a cable of an accelerator is made in sequence, return to removal.
| 
