 printable version
Early models
The replacement lamp is made in the following order:
| Fig. 15.36. Cover the back of the headlight
|
- Turn the cover on the rear of the headlamp counterclockwise and remove the cap from the lamp (Fig. 15.36);
| Fig. 15.37. Fasteners lamp lights: 1 - an electric socket; 2 - spring latch; 3 - Lamp
|
- Disconnect the electrical connector from the bulb (Fig. 15.37); - Press the spring latch release and then pull out the lamp; - Refit the new lamp; - Align the tab on the lamp holder with a recess in the body of the headlamp; - Press the spring latch), and set it in place, thus securing the lamp base; - Connect the electric socket of the lamp.
| 
