Terms of adjusting headlights

Tire pressure should correspond to the prescribed values.

The vehicle must be in running condition, filled with not less than 90% of the fuel tank, plus 75 kg (1 person) in the driver's seat.

The vehicle should be placed on a hard, flat floor.

Some times strongly press the front of the car to install the spring front suspension. After that, move the car a few meters.

Turn the knob range of illumination on the instrument panel to the "0".

On models with self-suspension system, control knob alignment system must be set to "4". If at the time the vehicle was operated with the adjustment knob at the 3, 5 or b, you must first install the regulator in position 2 with the ignition. The system in this case, to restore the level of suspension to normal. In this position, adjust the headlights.

Diffusers headlights must not be damaged or soiled.

Reflector lamps need to be in immaculate condition.

Adjustment is made only when the dipped beam. The amount of tilt for normal range of X-12 cm at a distance of 10 m; vehicles with light range control X - 10 cm. The fog lamps X - 20 cm at a distance of 10m.

Attention. On vehicles with light range control on the front crossmember next to the headlights there is a sticker with the data of the tilt in the "%". Lights should be placed with this inclination. Percentage values on the label refers to the projection distance of 10 m. When the slope of, for example 1.2% it amounts to 12 cm.

Lights can be adjusted as the gears and a large cross-slot screwdriver.

Internal control on every block lamp vertical adjustment is carried out, the outer - horizontal.