 printable version
Later models
Removal in the following order:
| Fig. 15.47. Removing the Bezel Blank
|
- A thin screwdriver to remove the bezel blank located between the direction indicators and fog lamp (Fig. 15.47); - Unscrew the two screws and remove the fog lamp to the front bumper; Attention. The lowest screw for adjusting the light headlights - Disconnect the electrical connector from the bulb. to gain access to the lamp lights, turn and remove the back cover;
| Fig. 15.48. The front fog lamp: 1 - spring latch; 2 - Incandescent fog
|
- Pushing the spring tabs latch release and pull out the lamp (Fig. 15.48).
| Fig. 15.49. Arrangement of the screw of adjustment of light fog in the vertical plane
|
Install in reverse order of removal. If necessary, rotate the adjusting screw to adjust the headlamp light in the vertical plane (Fig. 15.49). Adjustment of light in the horizontal plane is not possible.
| 
