Ignition System Check

6.5.1. Check the ignition system Digifant

6.5.2. Check the ignition system TC1-H

6.5.3. Checking the ignition FEI

6.5.4. Check the ignition system KE-Motronic

Check the ignition system in the following order:

- If the engine is cranking the starter but does not start, disconnect the high-voltage wire from all spark plugs and connect it to a more serviceable candle body is securely attached to the engine;

- Rotate the crankshaft and carefully look at the electrode gap more candles. It must be periodically slip bright blue sparks;

- If a spark is present, in the same way check the condition of the remaining high-voltage wires;

- Remove and check the spark plugs;

- If there is no spark, check the condition of high-voltage wires;

- In the further absence of spark, check the connection of the electrical connector to the ignition coil;

- Check the battery voltage;

- Check the ignition coil;

- In the further absence of spark ignition system make repairs on THAT.