printable version
Moldings, facing the wheel arches
| Fig. 16.1. Elements of decorative furnish of a body: 1 - front molding; 2 - molding the front door; 3 - locking button; 4 - molding the back door; 5 - rear molding
|
To remove the moldings 1, 2, 4, 5 (Fig. 16.1) from the door, pull the upper part of the lining of the door and remove the lower part of the liner with the holders. If the damage locking button 3 when removing the lining Replace button. When installing the lining of the door, set it on the lower part of the holder and snap the upper part of the lining. The holder is bonded to the door trim. For replacement of the warm up it and remove hot air. Before installing a new, clean surface of the door by adhesive residues using a solvent such as VW-D 002000.
| Fig. 16.2. Side trim: 1 - lined niches of the front wheel; 2 - the protective lining of the front door, the wheels; 3 - the holder of the lining; 4 - locking button; 5 - protective lining of the rear door; 6 - Rear facing niche; 7 - facing thresholds; 8 - locking button; 9 - decorative cap
|
To remove facing of a niche of the wheels 1, 6 (Fig. 16.2) drill head locking button and remove the main part of the button.
|