printable version
The front crossmember body
Removal in the following order: - Disconnect the negative terminal of the battery; - Disconnect electrical connectors from the headlights; - Unscrew and remove the lock of a cowl panel; - Loosen the bracket, disconnect the tank of the amplifier of brake system from the panel and remove it; - Remove the air intake grille; - Unscrew the two screws securing the panel to the upper edge of each side of the front fender;
| Fig. 16.8. Location tapping screws on the bottom of the front cross beam body
|
- Loosen the self-tapping screws (Fig. 16.8) securing the bottom panel; - Remove the lower bolts on each side of the panel; - Remove the panel. Installation spend to sequences, return to removal. Check the operation of the headlights, the bonnet latch and security. Check the adjustment of the light headlights.
|