 printable version
Receiver coding system
| Fig. 16.67. Receiver Heidelberg VI encoded. From previous receiver model is distinguished by the labels on the front and three arms - level controls, strip and treble
|
| Fig. 16.68. If the receiver is locked, the display shows the symbol ?�SAF-e?�
|
Some cars equipped with the receiver encoded Heidelberg VI (Fig. 16.67), a four-digit code of the fixed receiver is assigned by the manufacturer. Upon the termination of the power from the battery regardless of the cause, for example, by disconnecting the battery, removing the fuse or the receiver of the receiver, a special electronic device locks the receiver that becomes inoperable. In blocking the receiver on the display appears symbol ?�SAF-e?� (Fig. 16.68). After power is restored to enable the receiver, enter the security code. The receiver only perceives the code recorded by the manufacturer. This code can not be changed. To restore the performance of the receiver Heidelberg VI: turn on the unit (the display should appear the symbol ?�SAF-e?�); press the AM / FM button and SCAN and hold until the display shows the symbol "1000";
NOTE Too long retention buttons or accidental pressing again interpreted as the incorrect code. |
enter the code by pressing the station selection software, with the entered code appears on the display;
NOTE After two more unsuccessful attempts to decode (for example, after the introduction of the wrong code), the receiver is locked, and its performance can not be restored even entering the correct code. In this case, allow the receiver turned on for a long time, about an hour, then will reset the lock. |
press the AM / FM button and SCAN. Hold the button until the display shows the symbol ?�SAF-e?�, then release; enter the correct code in the described sequence.
|
