printable version
The front and rear bumpers
Removing the front bumper in the following order: - Remove the three screws that secure the lower air intake grilles; - Disconnect and remove the mounting tabs grille, lowered it down;
| Fig. 16.6. Details of the front bumper: 1 - the basis of the bumper; 2 - an arm; 3 - a bolt; 4 - sealing washer; 5 - directing; 6 - consolidation; 7 - pin strut; 8 - bumper; 9 - spoiler
|
- Disconnect and remove the pins 7 (Fig. 16.6) struts holding the bumper 8 to the wheel arch liner; - Disconnect the connectors for the fog lamps; - Remove the bolts of the bumper bolt without turning the engine to the body; - Moving forward remove the bumper. Installation spend to sequences, return to removal. Tighten to torque the bumper. Check the operation of the headlight washer. Removing the rear bumper in the following order: - Unscrew the bottom five screws fixing the bumper to the body; - Remove the luggage compartment cover, then remove the four bolts;
| Fig. 16.7. Details of the rear bumper: 1, 2 - bolts; 3 - an arm; 4 - the base of the bumper; 5 - sealing washer; 6 - guide; 7 - bumper; 8 - the screw; 9 - bracket (for station wagon)
|
Installation spend to sequences, return to removal. Tighten to torque the bumper.
|