REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Passat B6 (from the year 2004)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Volkswagen
	Passat B6
		Operation and maintenance of car
		Engine
		Transmission
			Overview
				Differences clutches
				Bleeding the clutch assembly
				Removing and installing the support bracket
				Removing and installing servopruzhiny
				Removing and installing clutch pedal
				Removing and installing master cylinder
				Hydraulic clutch
				Removal and installation of the working cylinder
				Installing the drive gear
				Removing and installing clutch production Sachs
				Removal and installation of the production of LuK clutch
				Check clutch
				Repair of the drive gear
				Removal and installation of the cuff with a button switch and noise insulation
				Removing and installing control cables - parts and components
				Removal and installation of the drive gear
				Adjusting drive the drive gear
			Manual Transmission
			Automatic transmission
			Drive Train
			Tables
		Chassis
		Steering Gear
		Brakes
		Onboard electric
		Body
		diagrams

printable version

Repair of the drive gear

Fig. 3.39. Drive gear: A - switch to move the cable switch; B - selector lever cable to move the selection; C - the heat shield; 1 - the shift lever; 2 - the intermediate lever

NOTE

Installation position of the drive gear

A - switching movement.

In - the movement of choice.

NOTE

For work on the drive gear disconnect a cable of weight from the battery.

When reconnecting the battery observe the works after connecting the battery.

To work with the mechanism of a gear change in the engine compartment, remove the air filter housing in the kit if it is on this mechanism.

To replace the control cable, remove the drive gear.

Do not bend the control cables.

« previos page
Check clutch

next page »
Removal and installation of the cuff with a button switch and noise insulation