Toe

Toe can be adjusted in the transverse steering rods, and not as it was before at Volkswagen, where it was possible to make the adjustment only on the left tie rod. Toe measured by the conventional method, and should note that the values given in degrees and minutes. The wheels must be free. The numerical value indicated in the table convergence adjustments and control.

The steering must be exactly in the middle position (straight ahead). To adjust, loosen the locknut toe on both sides of the car, located on the tie rod ends. In order to prevent the crank protective cover steering, loosen the clamp on the outside.

Rotate the tie rod with pliers left or right. Both tube tie rods move by the same amount that the steering wheel was in a central position. Tighten the lock nut Tie rod torque 55 Nm and secure protective covers again.