printable version
Ribbed Belts
Ribbed belt must be removed to access the coolant pump, generator or the crankshaft pulley.
| Fig. 469. In order to mitigate the tension V-belt tension roller rotate in the direction indicated by the arrow
|
Place a wrench on the nut of the tension wheel and turn the key in such a way to ease the tension on the serpentine belt (Fig. 469). Remove ribbed belt. Inspect poly V-belt: it must not be damaged, cracked. Replace damaged. Reinstall the tension roller, as described, slide the V-ribbed belt, install the clip on V-ribbed belt. Ribs should coincide with the grooves, and the belt should be positioned in the center of the pulley.
A warning Do not pull ribbed belt when installing a screwdriver or any lever on the pulley, so belt can immediately lose strength. |
|