| 1. The door must be customized, if it is not quite right sitting in the back, or after installing a new one. |
| 2. The adjustment is made by loosening screws attaching hinges and sliding the door. The hinges have a larger diameter hole than the diameter of the screw fastening, the hinge can be shifted. |
| 3. To adjust the size of the grooves to weaken the cross-shaped hinge screws on the body, do not remove. In order to be able to get to the screws, remove the door seal and trim cover on the rails. |
| 4. Adjust the size of the slots sliding the tailgate. |
| 5. At the bottom of the door necessary to make adjustment of the locking wedge (lock Body). To do this, loosen the locking wedge so that it can be moved from the place by force. To loosen the screws required Allen key 6 mm. Close tailgate and fit. Then carefully open the door and tighten the locking wedge two screws to 20 Nm. |
| 6. For better control over the movement, to delineate the locking wedge marker. |
| 7. Drive the door and the rubber lining. |
