 printable version
Technical data
Suspension
| Front suspension | | Type | MacPherson coil spring | | Wire diameter x diameter x height of the coil spring, mm | 12,3h140h305 / 314.9 | | Identification color | 12,3h140h305 / 314.9 | | Shock absorber | | Type | Hydraulic | | Stroke, mm | 161 | | The damping force at 0.3 m / s | Expansion H | 470 ?� 100 | | Compression H | 540 ?� 70 | | The size of tires | 155/80 R13, 175/70 R13, 185/60 HR14 | | Disc Diameter mm | 4,5JX13, 5Jx13, 5Jx14 | | Tire inflation pressure, kPa | 210 | | Rear suspension | | Wire diameter x diameter x height of the coil spring, mm | 12,0h95,0h150,0 | | The height of the spring in a free condition, mm | 344 | | Identification color | Yellow-1 line | | Shock absorber | | Type | Hydraulic | | Stroke, mm | 211 | | The damping force at 0.3 m / s | Expansion H | 390 ?� 100 | | Compression H | 330 ?� 70 |
Wheel alignment
Name | Front wheels | Rear wheels | | Convergence mm | 0 ?� 3 | 3 ?� 2 | | Camber | 0 ?� ?� 30 ' | -41 ?� ?� 30 ' | | Caster Angle | 1 ?� 48 '?� 30' | | | The angle of the kingpin | 11 ?� 03 '?� 30' | | | Offset kingpin mm | 5.8 | |
Wheels
| Runout | Steel wheels | Alloy wheels | | Radial mm | 0.6 | 0.3 | | Axial mm | 10 | 0.3 |
Tightening torques, N ??? m
| Nuts of fastening of the drive shaft | 220-250 | | The upper front strut mounting nuts | 20-30 | | Stand to the hinge | 75-90 | | Rack locking nuts | 60-70 | | The ball joint of the lower arm to the hinge | 60-72 | | Bracket to the bottom lever | 95-120 | | Bolt bracket of the lower arm | 95-120 | | Bolt bracket stabilizer bar | 17-26 | | The spherical rod end | 15-34 | | Nuts of fastening of draft of the stabilizer | 35-45 | | Bolt back support to the lower frame | 30-40 | | Nut back support | 45-60 | | The top nut of fastening of a back rack | 20-30 | | Lower nut-pillar | 75-90 | | Self-locking nut back rack | 45-50 | | Thrust to the rear axle stabilizer bar | 35-45 | | Bolt bracket rear stabilizer bar | 17-26 | | Lever rear suspension to the fastener axis | 130-150 | | Lever rear suspension (A) to the body | 100-120 | | Lever rear suspension (B) to a body | 80-100 | | Nut rear arm to the fastener axis | 130-150 | | Nut rear arm to the bracket | 100-120 | | Rear lever to the body | 40-50 |
Tightening torques, N ??? m
| The ball joint of the lower arm | Lubricant R-2 | As required | | Bearing stand | Lubricant SAE J310a, NLGI ?��1 | As required |
|
