 printable version
Start motor vehicles with carbureted engine
Normal engine start
| PERFORMANCE ORDER | | 1. On a car with manual transmission, set the gear lever to position "N" ("neutral gear") and depress the clutch pedal. On vehicles with automatic transmission, set the selector lever to position "P" ("Park"). |
A warning  Make sure that you fully depress the clutch pedal before starting the engine with a manual transmission. Otherwise there is a danger that, if when the engine car jump forward or backward, it can cause damage or injury to persons in the time outside the vehicle.
| | 2. Turn the ignition key to "START" ("Starter"). Release the key when the engine starts. If the engine does not start at the first attempt, do not keep the starter for more than 15 seconds. Wait a few seconds before trying again. |
|
Cold start
Start a warm engine
When cranking the engine a starter, press the accelerator pedal about half of its course.
| Pressing the accelerator pedal about half of its course when turning the crankshaft starter warm engine |
A warning If the engine fails to start because of too high ambient temperature, while cranking the engine, press the accelerator pedal all the way.
Turn the ignition key to "START" ("Starter") and when the engine starts, release the ignition key and the accelerator pedal. Pereobogaschenie toplivnovozdushnoy mixture ("Flooding the candles")
Click to stop and hold the accelerator pedal until the engine starts. Do not "rock" (press repeatedly) the accelerator pedal.
| Pressing the accelerator pedal all the way when you start the engine with the mixture pereobogaschenie toplivnovozdushnoy |
A warning If necessary, the prolonged heating of the engine, make sure the exhaust pipe is not some dry paper or other flammable items.
If the engine stalls
If the engine is stalled after start, repeat the above steps, taking into account weather conditions and the condition of the engine.
|
