|
|
 printable version
Technical data
| Clutch | Hydraulic | | The diameter of the friction lining (external x internal) | 200h130 (1.5 L) 184h127,5 (1.3 L) | | The inner diameter of the main cylinder | 20.64 mm | | The inner diameter of the cylinder | 15.87 mm | | Thickness of the clutch disc | 8,4 ?± 0,3 (1,3 l)
8,5 ?± 0.3 (1.5 l) | | Free travel | 6,13 mm | | The distance from the pedal to the floor while pressing the pedal | 90 mm | | The clutch pedal | 145 mm | | Minimum distance to heads of rivets at the limit of wear clutch facings | 1.1 mm | | The difference between the height of the ends of the diaphragm spring | 0.5 mm | | The clearance between the piston and the clutch slave cylinder | 0.15 mm | | The clearance between the piston and the clutch master cylinder | 0.15 mm |
Tightening torques, N ??? m
| Bracket clutch pedal | 19-28 | | Prop the clutch pedal to the master cylinder | 8-10 | | The connecting pipe coupling nuts | 13-17 | | Bracket pipe coupling | 4-6 | | The cylinder clutch | 15-22 | | Clutch Pressure Plate | 15-22 |
Recommended lubrication
| Elements | Grease | | The contact surface of release bearing | CASMOLY L 9508 | | The inner surface of release bearing | CASMOLY L 9508 | | The inner surface of the clutch cylinder, the piston and sleeve | Brake Fluid DOT 3 | | Slots clutch | CASMOLY L 9508 | | The inner surface of the clutch master cylinder, the piston and sleeve | Brake Fluid DOT 3 | | Pusher clutch master cylinder | J310a, NLGI ?„–2 | | The shaft and the clutch pedal bushing | J310a, NLGI ?„–1 | | Clutch fork | CASMOLY L 9508 | | Slots a primary shaft of a transmission | CASMOLY L 9508 |
|
|
