printable version
Warning light
Warning light (warning light engine management system) lights up on the instrument or HI-SCAN output DTCs in the following cases: 1. Within 0.1 seconds after the ignition is switched on the pressure in the intake pipe at least 118 mbar. 2. At engine speeds below 1980 min -1 pressure in the intake pipe at least 118 mbar. 3. When the accelerator pedal is released, the pressure in the intake pipe of at least 986 mbar, and the engine speed is not less than 2400 min-1 (as if the car was moving down the slope).
Check
Check the voltage at the terminals 1 and 4 electrical sensor connector (Fig. 2.239). Conclusion 4: "mass" absolute pressure sensor. Conclusion 1: The absolute pressure sensor output. In the event of a fault, replace the voltage sensor for absolute pressure
|